[ONIE] How to update ONIE on AS4610?

Steven_zhang • Created at：Dec 10, 2019 14:37:00 • Updated at：Dec 11, 2019 09:52:29

Step 1: Into the onie_rescue first.

When you reboot the switch, you will see this message like below the picture.

mceclip0.png

Please type any key, then you will get into the uboot.

After that, please type "run onie_rescue", then you will get into the ONIE.

mceclip1.png

Step 2: Setting the IP address for management port.

mceclip3.png

Step 3: update the ONIE.

By the way, you could use tftp for updating, too.

mceclip4.png


    Hot articles