Test result of Cable Diagnostics among Edgecore switches (ES3528M, ECS3510-28T, ECS4100-52T)
Cable Diagnostic supports either (A) cable failures, as well as the status and approximate distance to a fault or (B) the approximate cable length if no fault is found.
-------port admin up------------- Console(config)#interface ethernet 1/1 Console(config-if)#no shutdown -------port admin down----------- Console(config)#interface ethernet 1/1 Console(config-if)#shutdown Console#show in status ethernet 1/1
Prev Page How to configure the QinQ (Basic QinQ) on ES3510MA ?
Next Page How to set up "DHCP Dynamic Provision" on ECS4100 Series ?