1.    Copy the file Wedge100BF_Diag_v0_0_1_4.installer in USB disk

2.    Insert the USB disk to the device

3.    Connect the Wedge100BF console by baudrate 9600

4.    Login OpenBmc by username “root”, password “0penBmc”(number 0)              

5. Reboot and connect the COMe by command “wedge_power.sh reset;sol.sh”.

6. Choose “ONIE: Rescue” in the Grub menu  

7. Mount USB disk

Check the USB disk (/dev/sdb1) by command “fdisk –l”

ONIE:/ # fdisk -l

ONIE:/ # mount /dev/sdb1 /mnt/usb

8. copy /mnt/usb/Wedge100BF_Diag_v0_0_1_4.installer to /tmp

ONIE:/ # cp /mnt/usb/Wedge100BF_Diag_v0_0_1_4.installer /tmp

9. Install the Diag by onie-nos-install

ONIE:/ # cd /tmp

ONIE:/tmp # onie-nos-install Wedge100BF_Diag_v0_0_1_4.installer

Device will restart automatically after the installation.